SPLINTERS

Tennessee Valley Woodworkers

Vol. 23/ Issue 4   April 2008    Editor: Chuck Taylor 

=======Meeting Notice:========

The next meeting of the TN Valley Woodworkers
will be held April 15th at 7:00 p.m. at the
University of Tennessee Space Institute
All interested woodworkers are invited!

Please remember all our Troops around the world in your thoughts and prayers.

The following people have agreed to serve as contacts for their particular skills.  If you have questions, suggestions for activities, or other comments relating to these skills, please call these folks.  Their interest is to help the club better serve their area of expertise.  Your participation with them will help them achieve that goal.

                Design:        Tom Cowan    967-4835                             Finishing:      Phil Bishop          967-4626
            Turning:        Tom Church   967-4460                            Carving:        Harry May           962-0215
            Sharpening:    Bob Reese     728-7974                             Joinery:        Ross Roepke       455-9140
Maurice Ryan  962-1555   Health and Safety

List of Club Officers for 2008

                                                                                      President:                   Tom Gillard, Jr.
                                                                                      V. President:                Anthony Watts
                                                                                      Secretary:          Karen Kerce Browning
                                                                                      Treasurer:                      Jim Steadman
                                                                                      Publicity:                         Louis Bryant
                                                                                      Newsletter Editor:            Chuck Taylor

APRIL PROGRAM

April's Program will feature Alf Sharp who will present "18th Century Southern Furniture".  Alf is a renowned woodworker with many projects completed and is no stranger to our Club. He has over thirty years in the studio furniture field, and has completed fine commissions for a number of historical homes and museums, as well as many private and corporate clients.
He was part of the Capital Reconstruction project in Nashville and has reproduced antique furniture for a living. He lives and works in Woodbury, TN.
His website is http://www.alfredsharp.com/ . It would be well worth your while to take a look at some of the items Alf has "crafted".
 
 

"This promices to be an outstanding program with a premier furniture maker"


WELCOME TO OUR NEWEST MEMBERS
(Becoming members at our March meeting)

Thomas & Patricia Edde ------------- Hillsboro
Wayne Simmons ------------------- McMinnville
Paul and Anne Fulks --------------- Manchester
Brenda DeJoice ----------------------- Woodbury

(Be sure to meet our new members and make them feel a part of our great club)
 

KEEP UP WITH ALL THE CLUB NEWS

(TO VIEW THE LATEST INFORMATION CONCERNING CLUB EVENTS, UPCOMING PROGRAMS AND NEWS -- VISIT THE TVW WEB SITE BY CLICKING HERE)

The Tennessee Valley Woodworker's Web Site is constantly being updated with the latest club news and happenings. If you want to know the latest club news, be sure to take a look and check it out!!!!!!!
 

Click "here" to view all the latest information concerning "TVW Upcoming Events" or "here" to view upcoming programs on our Web Site.


TIME TO STOP AND PAY YOUR MEMBERSHIP DUES

As a reminder, your TVW dues were payable in January. April is the month we will begin to remove names of members who have not paid their 2008 dues. Our dues are $10.00 for a single membership, and $15.00 for a family membership (WHAT A BARGAIN).

If you would like to continue to be a member of the club and receive the Newsletter, please pay The club treasurer,Jim Steadman, at the next meeting or you can mail your dues check to Jim at his home address (702 Bluff Drive, Winchester, TN 37398).

Please pay Jim Steadman, the club treasurer, at the meeting or you can mail your dues check to Jim at his home address (702 Bluff Drive, Winchester, TN 37398).


NEXT MAJOR TVW EVENT
SPRING SEMINAR -- MAY 3

Our spring seminar will be on Saturday, May 3. The event will be held at the Forest Mill Church of Christ at 3366 McMinnville Highway just outside of Manchester.  The seminar will be presented by furniture maker Ronnie Young of Chattanooga.  Young specializes in high-end furniture with emphasis on embellishments such as inlays. He uses hand tools extensively and expertly to create beautiful period pieces of furniture. The cost of the event will be $45 for early registration or $50 at the door and will include a catered lunch and refreshments during the break.  Registration begins at 7:45.  The seminar begins at 8:30 and ends at 4:00.   Put this important date on your calendar. Contact Dan Maher (931-962-9750) or Tom Cowan (931-967-4835) for additional details.


SCHEDULE OF EVENTS FOR 2008

Dogwood Festival: April 11-13
Spring Seminar: May 3, Forest Mill Church of Christ, Presenter: Ronnie Young, Topic: Furniture Making, Chairpersons: Tom Cowan & Dan Maher
Annual Picnic and Auction: June 7, Chairperson – TBD.
Turning Bee: Date – June 14, Tom Cowan’s shop.
Coffee County Fair Demonstrations: September 15 – 20. Chairperson: Doyle McConnell.
Fall Seminar: Target date – October 18. Topics and presenters - TBD
Foothills Craft Exhibit: Date – November 7 & 8, Coffee County Convention Center, Chairperson – TBD.
Christmas Party: December 5, UTSI room 111, Chairperson - TBD
Shop Tours: Schedule will be developed as the year progresses. Chairperson – Doyle McConnell.
 

Other Events of Interest to our Club:
Polly Crockett Festival: September 20 - 21
Webb School Art and Craft Festival: October 18 & 19

The above list will be updated as additional information is known concerning these events.

TVW NEWS AND NOTES

DIGITAL LIBRARY NEWS


Don’t forget to take advantage of the vast amount of learning material in our club library.
For the latest listing of the library items available, please click  here or see Henry Davis at the next club meeting.

To check out a program , please see Henry Davis at the next club meeting.


CARVER’S CORNER

The carvers met at Phil Bishop's Shop on April 5 for a session on sharpening carver’s tools. Demonstrations were given by Steve Shores, Phil Bishop, Jim Wright and Bob Leonard. This was a very informative work session, because different techniques were discussed and all were useful.

Plans are underway for a deep relief class by Randy Walters. The class will be at Jim Wright's Shop. It will be for 3 days from 8:00 AM to 5:00 PM and possibly into the night. It is expected to be a “Friday thru Sunday” event. Additional information will be available as the event is developed.

The next meeting will be on May 3rd at Phil Bishop’s shop from 8:30 AM to 1130 AM. Those attending should bring something they want to work on. The Indian may be there for some finishing up work on him.
 
 


SHOP TOURS

We will soon be into the “Shop Tour” season. Everyone has a good time on the tours. If you are interested in being a “host” on the Shop Tour schedule this year, please contact Doyle McConnell. He is looking for shops to fill this year’s schedule. You can use the shop tour as motivation to clean up your shop.


TVW FOOTHILLS CRAFT EXHIBIT

The Club has reserved a room for a mini-exhibit at the Foothills Crafts fair at the Coffee County Convention Center on November 7 and 8.  The purpose of the event is to promote the Club's 2009 Exhibition.  More details regarding the Foothills Craft exhibit and the associated rules for entry will be available at the April meeting.


VOLUNTEERS FOR 2008

BREAK SNACKS: The "opportunity" to provide snacks at our monthly meeting is quickly disappearing. If you want to help with the monthly meeting "snacks", you need to hurry and sign up.

THOSE IN CHARGE OF SNACKS FOR THE APRIL MEETING: Felix Rees and Anthony Watts


SHOW AND TELL:

Jim Wright – Basswood bust of a mountain man, finished with linseed oil thinned with turpentine.  Then he used artist oils to dry brush on the highlights.

Jay Hazel – Inside out turning of candlesticks using maple and walnut. Jay explained the unusual process.

Doyle McConnell – Oak Burl pen and letter opener set.

Tom Gillard – Mock-up of a mantle for a client.  Once measurements are known he’ll make the full size mantle.

Ross Roepke Several boxes. Long walnut box with sliding top.  Chestnut box with walnut handle. A maple long slender box. A larger figured walnut jewelry box using book faced walnut.

Doug Dunlap – Three pepper mills made with kits and walnut turnings.

Loyd AckermanEnglish library stool of walnut left over from walnut table shown last month.

Jim ParkerAdirondack chair made from cypress. Found that the cypress is brittle and chips out.  Jim used stainless screws for the assembly.

Jim Van Cleave – Cherry Queen Ann style chest using techniques used at Tom Cowan’s session on decorating furniture. The cherry came from the baseboards of his father’s house.

Ken Gould – Top structure and shelf for an old Singer sewing machine.  Ken book matched the top and shelf.

Felix Rees Cherry box with trays from material that his Dad had.  He bought a new lathe and has one for sale.

Ken Burgess – Lighthouse carving and several small buildings from cottonwood bark.  He used a rotary tool with a 1/32” bit to make the small windows.

Harry MayStool with several carvings in the legs; a sphere, elephant, cobra snake, and a wood spirit.

Bob LeonardRed bird carving sitting on a boxwood base.

Bob AddingtonMounting jig for a 5” – 5 hole random orbit sander.  Solves the problem of aligning the disk with the sander base.

Matt BrothersJewelry and lingerie chest of cherry (54” high, 22” wide, 18” deep). Doyle McConnell tutored him on turning the legs for the chest. All the drawers were dovetailed. Flocking was used for the bottom of the jewelry drawers.

Geoff Roehm Dragon-fly figure, from clip art, on several plaques made with his CNC router machine.

HOW WOULD YOU LIKE TO SEE YOUR SHOP FEATURED IN
"WOOD MAGAZINE"?

Here is your opportunity. Do you have the kind of shop other woodworkers like to visit? Is your shop filled with clever ideas that help you work smarter, faster, or safer? Have you designed and built special tool racks, machine bases, cabinets, jigs, or other shop helpers you think your fellow woodworkers would find interesting? If so, the editors at WOOD magazine invite you to submit your workshop or individual shop projects for review for possible publication in future editions of America's Best Home Workshops. Your shop doesn't have to be big or nit-picky clean. The ideas could be storage solutions, task-specific jigs, shop tips, or the special way you designed, built, and outfitted your shop. Mail your entry to America’s Best Home Workshops, WOOD Magazine, 1716 Locust St., LS-221, Des Moines, IA 50309, or go online at:

www.woodmagazine.com/homeshops

WOODWORKER'S TIP

“Putty Trick”

When filling some nail holes with putty, sometimes the putty gets smeared. This can cause problems if the putty is lighter than the wood around it, which results in large ugly blotches (instead of tiny nail-sized spots). Here is a way to do it without a mess.

Before even picking up the hammer and nails, apply a strip of masking tape. Then nail and set the heads normally.

Finally, force the putty into the holes and remove the tape. The small “bump” of putty that remains can be easily sanded away.

   ----------From Wood Magazine----------

WOODWORKER HUMOR


TOOL DEFINITIONS

DRILL PRESS: A tall upright machine useful for suddenly snatching pieces out of your hands so that it smacks you in the chest and flings your “drink” across the room, splattering it against that freshly sprayed woodworking project you just finished.


LINKS AND CONTACTS

We are trying to start a new service for club members. Your VP, Anthony Watts, has requested that we add some key local suppliers to the website to help members find items needed in the shop; for example:  belts and pulleys.

To accomplish this, we've changed the table of contents at the left and top of the home page from LINKS toLINKS AND CONTACTS.  We will, from time to time, add information on the Links and Contacts page based on members inputs.  If you find a place to purchase something pertaining to woodworking and would like to share that information with others, send an email to Loyd Ackerman with the details for inclusion.  We're not trying to replace the Yellow Pages; this is just for those special items and special contacts.
Information needed is:  Name, address, phone #, and website (if they have one) of the business and what you found them.


MEMBER NAME TAGS

WANT A TVW NAME TAG? HERE IS THE WAY TO DO IT!!!!!

The name tag cost is about $5.00 including tax. You can get yours by contacting Jim Steadman (931-962-2940) or Chuck Taylor (931-728-7086) and they will secure a tag for you.

MEMBER INFORMATION CHANGES

We strive to always keep the club membership roster listing up-to-date. If you have address, email or phone number changes, please contact Chuck Taylor (931-728-7086) or Jim Steadman (931-962-2940) so that your information can be updated in our membership listings. We are making a concentrated effort to keep our membership information current.

PLAN TO ATTEND OUR NEXT MEETING
 ===== APRIL 15TH  =====
AT THE
UNIVERSITY OF TENNESSEE SPACE INSTITUTE.
 

WEB SITES OF INTEREST

Wood Central

American Association of Woodturners

Intarsia Net

Woodturners Catalog

Exotic Woods

Everything you always wanted to know about Dust Collection Systems
 

click on the image below to go to these sites
(Special contributors to Club functions and activities)


 


 
 


 
 


 
 


 

THIS IS THE END OF YOUR TVW NEWSLETTER FOR THIS MONTH
ANOTHER IS BEING PREPARED FOR YOUR "PLEASURE" NEXT MONTH
PLEASE SEND SUGGESTIONS/COMMENTS TO CHUCK TAYLOR